Vertical In-Place Inclinometer

The vertical in-place inclinometer is mainly used to measure the internal lateral movement of structures, such as landslides that may occur on unstable slopes or the lateral movement of surrounding earth in foundation pits, and is lateral deformation of dams, shafts, tunnel walls, caissons, piles and sheet piles, dams and roadway embankments. The inclinometer utilization of high-precision MEMS uniaxial/biaxial tilt sensor which adopts the principle of differential measurement, noise compensation technology and temperature compensation technology to ensure the high precision and resolution of the sensor.

Overview

Generally, in the structural engineering that needs to be monitored, an inclinometer pipe will be installed in the soil before the project starts, or installed in the concrete structure, buried under the slope, etc. The inclinometer tube usually has 4 orthogonal grooves to pass through the small pulley on the inclinometer rod of the guide wheel fixed inclinometer. To measure moorings, platforms, buildings and bridges, directly fix the probe on the measured point. When foundation pits, slopes, foundations, bridges and buildings are deformed or the ship’s mooring platform is tilted, the inclinometer probe will be tilted accordingly, and the lateral displacement or inclination can be accurately measured. Installing multiple inclinometers in the tube can make it accurately monitor the lateral deformation of structures.

Characteristic:

Uniaxial or Biaxial MEMS tilt sensors;
±15° or ±30° measure range, resolution up to 0.001°, accuracy up to 0.01°;
Temperature range from -20℃ to +60℃;
Stainless steel material, corrosion resistant, waterproof up to 1MPa;
Rod connection, flexible adjustment, easy installation;

Application scenarios:

Lateral deformation in dams and tailings;
The stability of natural slopes, landslides, embankments, subsea marine sediments;
The stability of slurry walls, sheet piling and tieback walls;
Lateral movements of tunnels and underground openings;

Specifications

Type	VIPI-S-SA	VIPI-S-DA	VIPI-S-DA-02	VIPI-P-DA
Sensor Connect	Series	Series	Series	Parallel
Measure Axial	X	X,Y	X,Y	X,Y
Measure Range	±15°	±30°	±30°	±30°
Resolution	0.009mm/0.5m(0.001°)	0.01mm/0.5m(0.0035°)	0.01mm/0.5m(0.0035°)	0.01mm/0.5m(0.0035°)
Accuracy	0.087mm/500mm(±0.01°)	±5mm/30m	±5mm/30m	±5mm/30m
Output	RS485	RS485	RS485	RS485
Supply Voltage	9~12VDC	9~12VDC	9~12VDC	9~12VDC
Static Current	165mA(@25℃, 5sensors)	165mA(@25℃, 5sensors)	165mA(@25℃, 5sensors)	80mA(@25℃)
Temperature Range	-20℃~60℃	-20℃~60℃	-20℃~60℃	-20℃~60℃
SensorSize	Φ35*250mm	Φ35*250mm	1354040mm	Φ35*560
Connection rod	Stainless steel rod (750mm/1000mm)	Stainless steel rod (750mm/1000mm)	Stainless steel rod (1000mm)	Steel wire rope
StandardSensor	1m/2m/3m	1m/2m/3m	1m/2m/3m	≥0.6m
Material	Stainlesssteel	Stainlesssteel	Stainless steel（rod）ABS(sensor shell）	Stainlesssteel
Waterproof	≥1MPa	≥1MPa	≥1MPa	≥1MPa
Weight	1kg	1kg	1kg	2kg

Related Information

1

www.300.cn Changsha

SEO Tags

Business License