Single Beidou GNSS Monitoring Integrated Device
The MAS-GNSS-SP-BDS series GNSS receiver is a Beidou independent positioning terminal. Based on a high-precision multi-system board, it adopts an integrated package, built-in GPRS\3G\4G communication module and data traffic card, and integrated solar power system. Users only need to connect an external solar panel to operate. It can achieve three-dimensional (X, Y, Z) millimeter-level monitoring data output at the observation point. Adopting a low-power design, it is suitable for geological disaster landslide monitoring, displacement and settlement monitoring of medium and small reservoirs and dams, displacement and settlement monitoring of mines/tailings ponds/open-pit mines/waste disposal sites/goaf, and settlement monitoring of iron towers, bridges, and buildings.
Overview
Characteristic:
- Uses a single BeiDou system (BDS) high-precision board, which can be combined with RTK positioning
- Highly flexible integrated design, suitable for deformation monitoring, network reference stations, driving test systems, mechanical control systems, etc.
- Uses AutoBase technology for quick and easy reference station configuration upon startup
- Ethernet, GSM/GPRS, and LORA communication interfaces are reserved
- Supports PJK plane coordinate output, eliminating the need for third-party software for projection conversion
- Supports automatic differential, with RTCM2.X and RTCM3.X differential formats supported
- Internal storage of 100M, allowing for automatic recording of raw data
Specifications
|
Model |
MAS-GNSS-SP-BDS |
|
System |
Single BeiDou |
|
Signal |
BDS, B1B2 |
|
Single Point Positioning Accuracy |
<1.5m |
|
RTK Positioning Accuracy |
Horizontal: ±(10 +1×10-6×D)mm (BDS) Vertical: ±(20 +1×10-6×D)mm (BDS) |
|
Static Positioning Accuracy |
Horizontal: ±(2.5 +0.5×10-6D)mm |
|
Initialization Time |
1 minute |
|
Initialization Reliability |
Greater than 99.9% |
|
First Positioning Time |
Cold start <50s |
|
Signal Reacquisition after Loss of Lock |
<2s |
|
Differential Data Format |
RTCM3.X |
|
Data Update Rate |
1Hz, 2Hz, 5Hz |
|
Data Format |
NMEA-0183/ RTCM2.X/ RTCM3.X |
|
Communication Protocol |
RS232, TCP/IP Communication Protocol |
|
Internal Storage |
Built-in 100MB storage (expandable) |
|
Built-in Lithium Battery |
12V, 25AH |
|
Operating Temperature |
-40℃～+70℃ |
|
Humidity |
100% fully sealed, anti-condensation, floatable |
|
Dust and Water Proof |
IP67 standard |
|
Power Consumption |
Less than 2W |
Related Information
Related Product
Request for Quote